The product is a flammable coating on the substrate surface, both because of its flat film and play a decorative role, but also in the event of a fire because of flammable coating on the substrate play fire protection prevent the spread of flame effect waterborne intumescent fire retardant coating. Coated on the substrate surface coating on the expansion of the foam in case of fire, the formation of the foam layer, foam layer not only cut off the oxygen, but also because of its loose texture and has good insulation properties, can delay heat transfer to be coated rate base; expansion foam coating process to produce because of the volume expansion of the foam layer and showed an endothermic reaction, but also consume a lot of calories, and it helps to reduce the temperature of the fire scene. As the product of fire effect is remarkable, decorative effect is obvious, it can be widely used in industrial and wood and its products, fiberboard and its products, cardboard and goods within the combustible substrate such as civil construction and design requirements for the combustion performance level B1 Other interior decoration materials class. Technical standards in line with the national standard GB 12441-2002 technical indicators. Fire performance to a fire performance. Construction Technology 1. Grassroots level should be smooth, firm, dry and clean, free of dust, grease, stains and dirt. 2 pre-construction shall paint coated stir. When the paint is too thick, you can add a small amount of dilution water; applied by brush, roller coating and spray coating method is available. 3 points at least twice coated on again after a dry coating can be carried out under the table again coated. 4. Coating requires a complete, seamless coating, smooth surface uniform, consistent color, coating thickness not less than 0.3mm, so as not to affect the fire effect. Precautions 1. Brushing construction, combustible substrate moisture content should not exceed 12%. 2 construction environment ventilation must be maintained, but the need to avoid dust. Reference dosage 0.5kg / m. Packaging and storage 1, packing: 10kg / barrel, 20kg / barrel. 2, Storage: Storage temperature should be maintained between 5 ℃ ~ 45 ℃, and stored in ventilated, dry coffers, to prevent direct sunlight, rain, away from fire. Shelf life is 12 months.